Import from analog sources
To record analog video (e.g. VHS or Hi8) you need a converter that connect to your computer and that has the required video and audio connections. This is also the case when recording from analog sound sources, such as a record player. Currently supported devices include Pinnacle products such as 500/510-USB, 700/710-USB and DVC 100, and webcams based on DirectShow technology.
To prepare for importing from an analog source, switch on the device and select it by name in the Source drop-down menu above the preview area. Also choose the applicable input (e.g. “Video Composite” or “Video SVideo”). If you wish to tweak the incoming analog signal prior to digitization, click the more button 
beside the Source drop-down menu. This provides access to the Input Levels window. (See “Adjusting audio and video levels” on page 220.)
beside the Source drop-down menu. This provides access to the Input Levels window. (See “Adjusting audio and video levels” on page 220.)Before starting the capture, make sure that your destination folder, compression presets, and other options are set up in the other panels as you want them. (See “Import sources” on page 219.)
To capture from an analog source:1 Verify that the input device is connected (e.g. “Video S-Video”).
2 Start the playback device just before the point at which you would like capture to begin.
Video and audio previewing should now be active. (If not, check the cabling and the converter installation.)
3 Click the Start Capture button to start recording.
The button caption changes to Stop Capture.
4 At the end of the segment click the button again. The captured material is stored in the Library.
5 Halt the source device.
To capture for a specified duration:1 Verify that the correct input is connected (e.g. “Video S- Video”).
2 Enter the desired capture duration in the Duration time-counter control below the video preview.
3 Start the playback device just before the point at which you would like capture to begin.
Video and audio previewing should now be active. (If not, check the cabling and the converter installation.)
4 Click the Start Capture button to start recording.
The button caption changes to Stop Capture.
5 The capture operation will stop automatically after the desired duration has been captured. You may also stop the capture manually by clicking the Stop Capture button.